產品規格及說明 | |
---|---|
設備品牌:帝龍 | 設備型號:JLCT50847-13 |
訂購價格:電話/面議 | 交貨日期:3~30/工作日 |
長度:847 | 色度:紫光 |
加工定制:是 | 照度:2.1mw/cm2 |
玻殼外徑:(T5)15 | 玻殼型式:石英玻璃 |
類型:紫外線消毒燈 | 燈管壽命:50000小時 |
燈管電壓,電流:455v/0.023 | |
產品標簽:紫外線殺菌燈管,w紫外線殺菌燈管,管徑15mmt5冷陰極,13w紫外線殺菌燈管,管徑冷陰極紫外線殺菌燈管 | |
咨詢熱線:13715339029 | 售后服務:13715339029 |
技術咨詢:13715339029 | ![]() |
紫外線輻射照度的測量需在光度測量臺上進行。測量時,燈以及紫外線輻射照度探頭要精確的安裝在測量臺上,燈-探頭的距離要可以自由變化并可被準確測量。如圖A.1所示。
To test the strength of uv rays, it should be done on the luminosity testing table. During the testing, the lamp and the uv radiation luminometer probe should be fixed on the testing table precisely and the distance between the lamp and the probe should be changeable flexibly and measured accurately.
為避免雜散光誤差,整個光度臺通常需置于墻壁刷為黑色的暗室中。如果沒有暗室,則需將光度臺置于不透光的箱子中,箱子的所有內壁都要貼上黑色絲絨布料。
To avoid error, the whole table should be placed into a black room. In case there is no such room, the table should be placed into a black case, inside which all the walls must be covered with black clothing.
5-2、測試方法 Testing method
將受試燈管固定在測量臺上,按燈的特性點燃,燈的中部的水平法線通過紫外線輻射照度計探頭的中心。燃點時,燈的發光面(如有的話)應垂直于光軌并與紫外線輻射照度計探頭接收面平行。
Fix the testing lamp on the table, light it according to its characters. Let the horizontal middle line of the lamp through the certer of the UV rays rediation luminometer probe. During lighting, the lighting surface(if any) should upright the lighting rail and parallel with the receiving surface of the probe.
將紫外線輻射照度計安裝在光軌上,使照度計的接受平面的法線與被測燈管中部的水平法線相重合。
Put the UV radiaion luminometer on the light track,making the middle line of receiving surface of luminometer superposition on the middle level line of testing lamp.
調節紫外線輻射照度計的位置,使紫外線輻射照度計的接受表面距被測燈管表面的距離為0。
Adjust the position of UV radiation luminometer, making the distance between the receiving surface of luminometer and testing lamp surface zero.
按第A.1接通受試燈管的電源使燈正常燃點,并預熱5 min。
Connect the power supply and lighting the testing lamp following the instruction of A.1., pre-heat it for 5 min.
應用范圍:應用于消毒柜、微波爐、空調美容美發器械等各種家電設備。醫院、學校、賓館、飯店、家庭、辦公室的空氣和物體表面的消毒殺菌。醫院、學校、賓館、飯店、家庭、辦公室的空氣和物體表面的消毒殺菌。Applications:hospitals 、school、 hotels、 residences、 offices, etc Disinfect the air and surface of goods. Allkinds of home electric equipment is available.Applications :jea;tj care etc